Barco FSN Series User Manual page 165

póëíÉã=bå~ÄäÉë
The figure below illustrates the Enables when the SYS (System) module is selected:
Figure 5-63. SYS Enables
Following are descriptions of each System Enable. Remember that each can be toggled
on or off without restriction:
•
•
•
^ìñ=bå~ÄäÉë
The figure below illustrates the available Enables when the Aux module is selected:
Figure 5-64. Aux Enables
Following are descriptions of each Aux Enable. Remember that each can be toggled on or
off without restriction:
•
FSN Series • User's Guide
{Input Map} — stores or recalls the panel's current input mapping, as set on the
Map Buttons Menu . Refer to the "
a menu description.
{All Inputs} — stores or recalls all input setup parameters (including the name)
for both native and universal inputs, as set on the Input Setup Menu . Refer to
the " Input Menu " section on page 187 for a menu description.
{Tally} — stores or recalls all tally settings, as set on the Tally Setup Menu .
Refer to the " Tally Setup Menu
{Aux 1} through {Aux 6} — stores or recalls the source assignment on the
selected Aux Bus. For example, if CAM 1 is assigned to Aux 2 , that association
will be stored or recalled in the memory register.
5. Menu Orientation
Map Buttons Menu " section on page 210 for
" section on page 214 for a menu description.
Memory Menu
165