Capture And Timing Section - Barco FSN Series User Manual

5. Menu Orientation
System Menu
`~éíìêÉ=~åÇ=mêçÅÉëë=m~åÉä
On the Input Setup Menu for universal inputs, press {Capture and Process} to display
Capture
the Capture and Process Panel .
And
The panel is divided into two sections:
Process
•
•
`~éíìêÉ=~åÇ=qáãáåÖ=pÉÅíáçå
The figure below illustrates the Capture and Timing Section for universal inputs:
Capture and Timing
Figure 5-91. Capture and Timing Section, Universal Inputs
The following adjustments are provided:
•
Auto
Acquire
Off
200

Capture and Timing Section

Processing Section
Auto
Input EDID
Acquire
Format Format
Off
Adjust Adjust
H V
Timing Timing
Press {Auto Acquire} to toggle the Auto Acquire mode On or Off . This function
is per connector on the UIC , and not per input.
~
When Off , you can manually set the resolution of the incoming source
using the {Input Format} button.
~
When On , the system attempts to detect the input resolution. As the
system auto-acquires, it compares the incoming signal to the formats
stored in the Input Format Table . When an exact match is found, the
format is applied and the Format field in the table is updated.
Note If an exact match cannot be found, you may need to use
{Input Format} button to set the format manually.
Please note the following important points regarding Auto Acquire :
~
Once the system acquires a new input format, it automatically scales the
input up (or down) to the current native resolution.
~
The input's aspect ratio is fully maintained in this process, and no
masking will be applied. For example:
• If a 1024 x 768 input is scaled up to 1920 x 1080 (HD/1080i),
the system fills vertically, leaving black "pillars" on either side of
the input.
• If a 1920 x 1080 input is scaled down to 1280 x 720 (HD/720p),
the system fills horizontally, leaving black "bars" on the top and
bottom edges of the input.
~
After the input has been acquired, you can manually change the method
by which the system fills the screen, and you can also mask any edge
Color 1:1
Sample
Space Sampling
Phase
SMPTE
On
FSN Series • User's Guide