Barco FSN Series User Manual page 36

2. FSN-1400 Orientation
Hardware Description
3)
4)
5)
6)
7)
36
~
UIC I/O Cards). Up to five cards can be installed in slots 3 through 7.
Refer to the "Universal Input
M/E Card I/O
Slot 8 is reserved for the required M/E I/O card. Refer to the
on page 43 for details.
DVE (Blank)
Slots 9 and 10 are reserved for blank panels, as the optional DVE card does not
require any I/O. See the "Digital Video Effects
Aux Output Card I/O
Slots 11, 12 and 13 are reserved for two types of optional Auxiliary output I/O
cards:
~
UOC (Universal Output Card). Up to two I/O cards can be installed. See
the "Universal Output
~
NAC (Native Aux Output Card). Up to three I/O cards can be installed.
See the "Native Aux Output
System Card I/O
Slot 14 is reserved for the System I/O card. Refer to the
on page 38 for details.
AC Power
The AC Power section provides two AC power connectors with integral switches.
One connector is provided for each supply, which allows the frame to be powered
from two different circuit breakers in a redundant configuration.
Note The default FSN-1400 configuration has one power supply
installed in the lower slot. The bottom AC connector is used.
Important
Unused rear I/O slots must have blank panels installed for
purposes of thermal management and EMI.
Card" section on page 49 for details.
Card" section on page 51.
Card" section on page 52.
Card" section on page 54.
"System
FSN Series • User's Guide
"M/E Card" section
Card" section