Barco FSN Series User Manual page 107

7.
8.
9.
`~êÇ=oÉãçî~ä
To remove a card:
1.
2.
Figure 4-14. Card removal
3.
4.
5.
FSN Series • User's Guide
Release the handles so that they spring back and lock into place.
Repeat from step 1 for all additional cards that you want to install.
When complete, re-install the chassis front door, close and secure.
Open the chassis front door and remove it (if desired).
For the selected card, simultaneously squeeze the two black handles together on
each ejector, then pull the ejectors away from the center of the card.
Caution Always pull both latches simultaneously. If you only use one
latch, you can damage the card.
When both latches have disengaged from the chassis, remove the card
completely and store it safely in an anti-static bag.
Important Unused rear I/O slots must always have blank panels
installed.
Repeat from step 2 for all additional cards that you want to remove.
When complete, re-install the chassis front door (if required), close and secure.
4. Installation
Card and I/O Installation
Squeeze
together
and pull
Squeeze
together
and pull
107