Barco FSN Series User Manual page 255

Use the following steps to set up universal input capture and timing parameters:
9.
10. Press {Capture and Process} to display the Capture and Process Tab .
11. Press {Auto Acquire} to toggle the Auto Acquire mode On or Off as required.
12. If required, press {Input Format} to display the Input Format Keypad . Locate
13.
14.
15.
16.
17.
18.
Use the following steps to set up universal input processing parameters:
19. Press {Sharpness} , and use the Sharpness control to set the input's sharpness.
20.
21.
22. If Motion Adaptive de-interlacing is selected, press {Motion Threshold} and use
Use the following steps to set up universal input sizing and scaling:
23. Press {Sizing and Scaling} to display the Sizing and Scaling Tab .
FSN Series • User's Guide
Press {Setup} to display the Input Setup Menu for the selected universal input.
~
When Off , you can manually set the resolution using the {Input Format}
button.
~
When On , the system attempts to detect the resolution. When a match
is found, the format is applied and the Format field in the table is
updated. Once the system acquires a new format, it automatically scales
the input up (or down) to the current native resolution.
Note If an exact match cannot be found, you may need to use
{Input Format} button to set the format manually.
the desired format and press {Apply} .
Analog and DVI inputs only
Format Keypad . Locate the desired EDID format and press {Apply} to program
EDID.
Important This function is designed for advanced users only. Do not
program the EDID unless it is necessary.
Analog and DVI inputs only
and RGB processing, as required.
Analog inputs only — Press {1:1 Sampling} to toggle the 1:1 sampling mode on
or off, as required.
Analog inputs only — Press {Sample Phase} , and use the Sample Phase
control to adjust the input's A/D converter. For optimum visual results when
adjusting high-resolution sources, output a burst test pattern from the source, and
adjust for minimum noise.
Analog inputs only — Press {Adjust H Timing} to adjust the image's horizontal
timing. Use the {H Pos} , {H Active} and {H Total} controls as required.
Analog inputs only — Press {Adjust V Timing} to adjust the image's vertical
timing. Use the {V Pos} and {V Active} controls as required.
Component, S-video and composite inputs only
to toggle the Pulldown Compensation mode on or off, as required.
Interlaced formats only — Press {De-Interlace} to display the De-Interlace
Pop-up . Choose either Motion Adaptive or Field to Frame mode.
the control to adjust the threshold of the motion adaptive de-interlacer, if required.
— Press {EDID Format} to display the EDID
— Press {Color Space} to toggle between SMPTE
— Press {Pulldown Comp}
6. System Setup
Universal Input Setup
255