Barco FSN Series User Manual page 204

5. Menu Orientation
System Menu
páòáåÖ=~åÇ=pÅ~äáåÖ=m~åÉä
On the Input Setup Menu for universal inputs, press {Sizing and Scaling} to display the
Sizing
Sizing and Scaling Panel . This panel enables you to scale a non-native resolution input
and
up (or down) to the system's native resolution, and fill the screen with the image. The panel
Scaling
also enables you to mask the image if required.
The panel has one section, as shown below:
Sizing and Scaling
Figure 5-93. Sizing and Scaling Section
The following adjustments are provided:
•
Fill
H
Figure 5-94. Fill H examples
204
Fill Fill Fill
H V H/V
Press {Fill H} to scale the selected universal input up (or down) to the current
native horizontal resolution. Please note:
~
Aspect ratio is maintained.
~
If the left and/or right edges of the image are manually masked, those
edges are used for the Fill H calculations.
~
Black bars are visible above and below an image, for example, when a
16:9 image is scaled down to 4:3.
~
The top and bottom portions of an image may fall outside of the raster,
for example, when a 4:3 image is scaled up to 16:9.
The images below represent two examples of Fill H .
1024 x 768 scaled up
to 1920 x 1080
Reset
Fill
Clear
Mask
Reset
All
1920 x 1080 scaled down
to 1024 x 768
FSN Series • User's Guide