Barco FSN Series User Manual page 211

_ìííçå=j~é=q~ÄäÉ
The figure below illustrates the Button Map Table :
Button
1
2
3
4
5
6
7
8
9
10
Figure 5-100. Button Map Table (sample)
On the Palette , the Button Map Table lists the current mapping for all shifted and un-
shifted buttons. Please note:
•
•
The following columns of information are provided in the table:
•
•
•
Refer to the "
information.
j~é=_ìííçåë=jÉåì=cìåÅíáçåë
The following adjustments are provided in the Map Buttons Menu :
•
Panel
Button
8
•
SHIFT
FSN Series • User's Guide
Source / Cut Linear Key Fill
CAM1
CAM2
CAM3
CAM4
VT-1
VT-2
DO-1
CHY1 CHY2
CB-1
The yellow highlight indicates the selected shifted or unshifted button to which a
source can be mapped. The highlight tracks the selection that is made with the
{Panel Button} knob.
The blue highlight indicates whether you are mapping a source/cut or a linear key
fill. This highlight tracks the two button selections in the Tool Bar — {Map
Source/Cut} and {Map Linear Key Fill} .
Button — indicates the selected shifted or unshifted button. Press {SHIFT} to
change the column labels from 1 - 10 to 11 - 20 .
Source/Cut — displays the source (or linear key "cut" signal) that is mapped to
the selected panel button. Press {Map Source/Cut} to select and highlight the
field in blue.
Linear Key Fill — displays the linear key "fill" signal that is mapped to the
selected panel button. Press {Map Linear Key Fill} to select and highlight the
field in blue.
Mapping Luma Keys and Linear Keys
Press {Panel Button} (or use the knob) to select the button that you wish to map.
Note that selecting buttons in this manner automatically affects the state of the
{SHIFT} button.
Press {SHIFT} to switch between mapping un-shifted buttons and shifted buttons
on the panel:
~
When {SHIFT} is off, you can map buttons 1 - 10 , and the labels in the
Button column read 1 - 10 .
5. Menu Orientation
System Menu
" section on page 213 for additional
211