Configuration Restore From Tftp - Panasonic GA-ML Series Manual

14.2.2.2 Configuration Restore from TFTP

Use the following window to recover the switch configuration from a TFTP
server.
Choose Tool > Configuration Recovery ＆ Backup > Configuration
Restore from TFTP (Servers) to display the following window.
Figure 14-11 Configuration Restore from TFTP (Servers)
You can configure the following parameters.
Parameter
TFTP Server IP
Source File
Destination File
Replace
Click Restore to start restoring.
14.2.2.2 Configuration Restore from TFTP
Enter an IP address of a TFTP server.
• IPv4 - Choose and enter an IPv4 address of a TFTP
server.
• IPv6 - Choose and enter an IPv6 address of a TFTP
server.
Enter the source file-name and path of a configuration
file in a TFTP server. The number of characters for this
field can be up to 64.
Enter a destination path and a location in the switch
where a configuration file is saved. The number of
characters for this field can be up to 64.
• If you choose the running-config option, the
configuration file being executed is restored to be
overwritten.
• If you choose the startup-config option, the start-
up configuration file in a switch is restored to be
overwritten.
If you use choose this option, a configuration file in a
switch is replaced by this file.
Overview
14 Tool Bar
415