Panasonic GA-ML Series Manual page 361

Figure 9-63 Storm Control (Level Type, Level)
You can configure the following additional parameters.
Parameter
Level Rise
Level Low
Click Apply to reflect the change.
Enter the value of level rise. This option specifies the
rising threshold (with a percent) to all the bandwidth
per port, which receives traffics. The range is from 1 to
100 (%).
Enter the value of level low. This option specifies the
low threshold (with a percent) to all the bandwidth per
port, which receives traffics. The range is from 1 to 100
(%). If you do not specify the value of level low, the
value equivalent to 80% of the specified rising-level
becomes the default value.
9.13 Storm Control
Overview
9 Security
359