Panasonic GA-ML Series Manual page 228

Parameter
Exceed Action
Violate Action
Color Aware
Choose the exceed-action to be taken. This action is
taken on the yellow colored packets, which exceed the
bandwidth limitation. The options available are as
follows.
• Drop - This option allows you to drop the packets.
• Set-DSCP-Transmit - This option allows you to
configure and transmit the value of new DSCP to
packets.Enter the DSCP value in the entry field
displayed.
• Set-1P-Transmit - This option allows you to
configure and transmit the value of new IEEE 802.1p
to packets. Enter the IEEE 802.1p value in the entry
field displayed.
• Transmission - This option allows you to transmit
packets without changing them.
• DSCP-1P Configuration - This option allows you to
configure and transmit the values of a new DSCP
and IEEE 802.1p to packets. Enter the values in the
entry field displayed.
Choose a violate action to be taken. This action is
executed for the red colored packets. The options
available are as follows.
• None - No violate action is taken.
• Drop - This option allows you to drop the packets.
• Set-DSCP-Transmit - This option allows you to
configure and transmit the value of new DSCP to
packets. Enter the DSCP value in the entry field
displayed.
• Set-1P-Transmit - This option allows you to
configure and transmit the value of new IEEE 802.1p
to packets. Enter the IEEE 802.1p value in the entry
field displayed.
• Transmission - This option allows you to transmit
packets without changing them.
• DSCP-1P Configuration - This option allows you to
configure and transmit the values of a new DSCP
and IEEE 802.1p to packets. Enter the values in the
entry field displayed.
This parameter enables or disables a function of the
color aware.
• If enabled, the policer operates as the Color Aware
mode.
• If disabled, the policer operates as the color blind
mode.
7 QoS (Quality of Service)
7.2.8 Policy Map
Overview
226