Panasonic GA-ML Series Manual page 303

In the section of AAA 802.1X Authentication Settings, you can
configure the following parameters.
Parameter
Primary Database
Secondary Database
Action during an
Authentication
Failure
Click Apply to check the content changed.
9.3.2 AAA Authentication Settings
Choose a primary database to use for IEEE 802.1X
authentication. The options available are as follows.
• RADIUS - Uses the database on a RADIUS server as
the primary database.
• Local - Uses the local database on a switch as the
primary database.
Choose a secondary database to use for IEEE 802.1X
authentication. The options available are as follows.
• None - Does not use the secondary database.
• RADIUS - Uses the database on a RADIUS server as
the secondary database.
• Local - Uses the local database on a switch as the
secondary database.
Choose an action to execute in case of the IEEE 802.1X
authentication failure. The options available are as
follows.
• Stop - Uses a primary database to stop an
authentication in case of the IEEE 802.1X
authentication failure.
• Secondary DB - Uses a primary database to start an
authentication by using the secondary database in
case of the IEEE 802.1X authentication failure.
Overview
9 Security
301