Panasonic GA-ML Series Manual page 53

In the section of Login Method, you can configure the following
parameter.
Parameter
Log-in Method
In the section of Login Password, you can configure the following
parameters.
Parameter
Application
Password Type
Password
Click Apply to add new entries based on the information specified.
Click Delete to delete the entry.
Click Edit, and then this parameter becomes
configurable. Choose the log-in method for the
application specified. The options available are as
follows.
No - Log-in authentication to access the application
specified is not needed.
Log-in - You need to enter a password when accessing
the application specified.
Log-in Local - You need to enter a user-name and a
password to access the application specified.
Choose an application to configure. The options
available are Console, Telnet and Secure Shell (SSH).
Choose a password-encryption type to use. The options
available are Plain Text and Encrypted.
Enter a password of the application selected. This
password is used when the login method of the
application specified is set to login.
• In the plain-text form, the number of characters for a
password can be up to 32. The password is case-
sensitive and can contain spaces.
• In the encrypted form, the number of characters for
its password can be up to 35, as the maximum bytes,
and be case-sensitive.
4 Management
4.2 Login Method
Overview
Overview
51