10
OAM (Operations, Administration &
Management)
10.1
Cable Diagnostics
Use the following window to start the cable diagnostic test for the port
specified and display the result.
Choose OAM > Cable Diagnostics to display the following window.
In the section of Cable Diagnostics, you can configure the following
parameter.
From Port/ To Port
Click Test to start the cable diagnostic test on the port(s) specified.
Click Clear All to clear all the results regarding the cable diagnostic.
Click Clear to clear the result for the cable-diagnostic of the port specified.
Figure 10-1 Cable Diagnostics
Parameter
Choose the port you use.
10 OAM (Operations, Administration & Management)
Overview
10.1 Cable Diagnostics
368