3.4
System Log
3.4.1
Use the following window to implement the settings on system logs and
display its settings.
Choose System > System Log > System Log Settings to display the
following window.
In the section of the Log State, you can configure the following
parameter.
Log State
Click Apply to reflect the change.
In the section of Buffer-log Settings, you can configure the following
parameters.
Buffer Log State
Severity
System Log Settings
Figure 3-10 System Log Settings
Parameter
This parameter enables or disables the status of a global
system log.
Parameter
This parameter enables or disables the state of a global
buffer-log. The options available are enable, disable and
default. If you choose Default, the state of a global
buffer log complies with the default operation.
Choose the severity of the information type to be
logged. The values to choose: 0 (Emergencies),
1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5
(Notifications), 6 (Information), and 7 (Debugging).
3.4 System Log 3.4.1 System Log Settings
Overview
Overview
3 System
24