9.1.3
Port Security Address Entries
Use the following window to implement the settings on the MAC address
entry of the port security and display its settings.
Choose Security > Port Security > Port Security Address Entries to
display the following window.
In the section of Port Security Address Entries, the following
parameters can be configured.
Parameter
Port
MAC Address
VID
Click Add to add new entries.
Click Delete to delete the entry specified.
Click the Clear by Port button to delete all the secure MAC addresses for
the port specified.
Click the Clear by Mac button to delete the address specified among the
secure MAC addresses on the optional port.
Click Clear All to clear and delete all the secure MAC addresses for a port.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 9-3 Port Security Address Entries
Choose the port you use.
Enter a MAC address. If you choose the Permanent
option, all the MAC addresses learned are not cleared
except for the case that users delete an entry, manually.
Enter the VLAN ID you use. The range is from 1 to
4,094.
9.1.3 Port Security Address Entries
Overview
9 Security
282