Table of Contents
Advertisement
Figure 7-15 Aggregate Policer (2 Rate Settings)
In the section of 2 Rate Settings, you can configure the following
parameters.
Parameter
Name of Aggregate
Policer
CIR
Burst Confirmation
PIR
Peak Burst
Enter the name of an aggregate policer.
Enter the value of CIR (Committed Information Rate).
The range is from 0 to 10,000,000 (Kbps). The certified
packet rate is the first token bucket for the two-rate
metering.
Enter the value of a burst confirmation. The range is
from 0 to 16,384 (Kbyte). The value of the confirmation
specifies the burst size for the first token bucket in kbps.
Enter the value of PIR (Peak Information Rate). The
range is from 0 to 10,000,000 (Kbps). The rate is the
second token bucket for the 2 rate metering.
Enter the value of the peak burst. The range is from 0 to
16,384 (Kbyte). This is the burst size of the second
token bucket (kilo-bytes).
7 QoS (Quality of Service)
7.2.7 Aggregate Policer
Overview
217
Hide quick links:
Advertisement
Table of Contents
