Web User Interface (Web Ui); Connecting To The Web Ui - Panasonic GA-ML Series Manual

2

Web User Interface (Web UI)

2.1

Connecting to the Web UI

You can directly or indirectly access the Web UI of a switch from any
networking nodes, which are connected to an Ethernet port, by using the
standard web browser. Implement the additional security settings on the
Web UI to control the access to the switch. By default, an IPv4 address of
the switch is set to 0.0.0.0. Use CLI from a console port to configure the
IPv4 address of the switch, first. Refer to "CLI reference manual" for
details. Next, launch the Web browser. Enter the IPv4 address of the
switch on the address bar of Uniform Resource Locator (URL), and then
press Enter.
By default, you can enter "manager" in the spaces provided for a user-
name and a password, as illustrated in the figure below. Then click the
Log-in button.
After logging in the screen above, you can access the Web UI as below.
Figure 2-1 Enter IPv4 Address
Figure 2-2 Password
2 Web User Interface (Web UI)
2.1 Connecting to the Web UI
10