Panasonic GA-ML Series Manual page 244

Parameter
Destination
Specify ICMP
Message Type
ICMP Message Type
Message Code
DSCP
Traffic Class
Choose and enter the value of the destination port.
The options available are as follows.
• = - ACL uses the port-number specified, only.
• > - ACL uses all the ports, which are greater than the
port-number specified.
• < - ACL uses all the ports, which are smaller than the
port-number specified.
• ≠ - ACL uses all the ports except the port-number
specified.
• Range - ACL uses the port, which is specified within
the range.
• Mask - ACL uses the port within the range of the
mask specified. Enter the value of a port-mask in the
entry field displayed. The range is from 0x0 to
0xFFFF. This parameter is available when you select
TCP or UDP as the protocol type.
Choose the ICMP Message Type you use. This
parameter is available when you select ICMP as the
protocol type.
If you do not choose the Specify ICMP Message type,
enter the numerical value of an ICMP Message Type.
The range is from 0 to 255. If you choose the ICMP
Message Type, the numerical value of the message
type is automatically entered. This parameter is available
when you select ICMP as the protocol type.
If you do not choose the Specify ICMP Message type,
enter the numerical value of a message code to use. The
range is from 0 to 255. If you choose the ICMP
Message Type, the numerical value of the message
type is automatically entered. This parameter is available
when you select ICMP as the protocol type.
Choose the DSCP value you use. The options available
are default (0), af11 (10), af12 (12), af13 (14), af21
(18), af22 (20), af23 (22), af31 (26), af32 (28), af33
(30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16),
cs3 (24), cs4 (32), cs5 (40), cs6 (48), cs7 (56), and ef
(46).
• Value - You can enter the DSCP value, manually. The
range is from 0 to 63.
• Mask - Enter the value of DSCP mask. The range is
from 0x0 to 0x3F.
Choose and enter the value of a traffic class. The range
is from 0 to 255.
• Mask - Enters the value of a traffic-class mask. The
range is from 0x0 to 0xFF.
8 ACL (Access Control List)
8.1.3 IPv6
Overview
242