Configuration Restore & Backup; Configuration Restore From Http - Panasonic GA-ML Series Manual

Hide thumbs Also See for GA-ML Series:

Table of Contents

14.2.2 Configuration Restore & Backup 14.2.2.1 Configuration Restore from HTTP

Configuration Restore & Backup

Use the following window to restore the configuration in a switch by using

HTTP from a local PC.

Choose Tool > Configuration Restore & Backup > Configuration

Restore from HTTP from the tool-bar to display the following window.

Figure 14-10 Configuration Restore from HTTP

You can configure the following parameters.

Destination File

Click Restore to start restoring.

Click Browse to move to the location where a

configuration file (on the local PC) exists for the purpose

of this restoration.

Enter a destination path and a location in the switch

where a configuration file is saved. The number of

characters for this field can be up to 64.

• If you choose the running-config option, the

configuration file being executed in a switch is

restored to be overwritten.

• If you choose the startup-config option, a start

• -up configuration file in a switch is restored to be

overwritten.

If you choose this option, a configuration file in a switch

is replaced by this file.

Show Quick Links

Table of Contents