Panasonic GA-ML Series Manual page 179

Parameter
RRP Node Type
Primary Port
Secondary Port
Polling Interval
Failure Period
Ring-Guard Port
Control VLAN
Data VLAN
Click Apply to reflect the change.
Click Cancel to delete the change.
Click Back to return to the previous window.
5.9 RRP (Ring Redundant Protocol)
Choose the type for RRP-node. The options available are
as follows.
• Master - Specifies the node as the master node in
the domain. Only one master-node can specified in
one RRP domain. Roles of the master-node include
ring-polling and ring-restoration.
• Transit - Specifies the node as a transit node in the
domain. Many transit-nodes can be specified in one
RRP domain. Responsibilities of a transit-node
include link-down alerts.
Chooose a primary port. This port will be the first port in
the RRP domain. If you choose the Default option, the
current settings is cleared.
Choose a secondary port. This port becomes the second
port in the RRP domain. If you choose the default
option, the current settings is cleared. If you choose the
Default option, the current settings is cleared.
Enter the polling interval of hello-packets. The range is
from 1 to 2 (seconds). The polling interval should be
shorter than the failure period.
Enter the disorder period. The range is from 2 to 5
(seconds). The failure period should be longer than the
polling interval.
Chooose the port state of RRP ring-guard. The options
available are as follows.
• Primary - This specifies a primary port as the port
corresponding with a ring guard.
• Secondary - This specifies a secondary port as the
port corresponding with a ring-guard.
• Both - This specifies for both primary and secondary
ports as the port, which corresponds with the ring-
guard.
• Disabled - Disables this function.
Enter an ID of the control VLAN. The range is from 2 to
4,094.
Enter an ID of the data VLAN. The range is from 1 to
4,094.
5 L2 Features
Overview
177