Panasonic GA-ML Series Manual page 235

Parameter
Ethernet Type
Ethernet Type Mask
CoS
VID
Time Range
Action
Click Next to proceed to the next step in the wizard.
Click Back to return to the previous step in the wizard.
After you click Next (in the previous step), the following window is
displayed.
Figure 8-5 ACL Configuration Wizard (Choosing a port and direction)
You can configure the following parameters.
Parameter
From Port/ To Port
Direction
Enter the Ethernet-type with hexadecimal-value. The
range is from 0x600 to 0xFFFF. If you choose an
optional Ethernet-type profile from the Specify
Ethernet Type drop-down list, the appropriate
hexadecimal-value is automatically displayed.
Enter the Ethernet-type mask with hexadecimal-value
The range is from 0x0 to 0xFFFF. If you choose an
optional Ethernet-type profile from the Specify
Ethernet Type drop-down list, the appropriate
hexadecimal-value is automatically displayed.
Choose the CoS-value you use. The range is from 0 to 7.
• Mask - Enter the CoS mask value. The range is from
0x0 to 0x7.
Enter the VLAN ID you use. The range is from 1 to
4,094.
• Mask - Enter the value of VLAN ID mask. The range
is from 0x0 to 0xFFF.
Enter the name of the time-range profile, which is used
in this ACL rule. The number of characters for the name
can be up to 32.
Choose an action to execute with this rule. The options
available are Permit, Reject, and Reject CPU.
Choose the port you use.
Choose a direction. The options available are In and
Out.
8 ACL (Access Control List)
8.1.1 MAC ACL
Overview
Overview
233