14.2 Tool 14.2.1 Firmware Upgrade & Backup 14.2.1.1 Firmware Upgrade from HTTP (Servers)
You can configure the following parameters.
Parameter
Source File
Destination File
Click Upgrade to start upgrading.
Figure 14-2 Firmware Upgrade from HTTP (Servers)
Click Browse to navigate to the location where a
firmware file exists (on the local PC) for this upgrade.
Enter the destination path and location in the switch
where new firmware is stored (or saved). The number of
characters for this field can be up to 64.
Overview
14 Tool Bar
406