Ethernet Oam; Ethernet Oam Configuration - Panasonic GA-ML Series Manual

10.3

Ethernet OAM

10.3.1
Use the following window to display the Ethernet OAM configuration.
Choose OAM > Ethernet OAM > Ethernet OAM Configuration to
display the following window.
In the section of Ethernet OAM Configuration, you can configure the
following parameters.
Threshold of
CRC Errors for
Receiving Frames
(High)
10.3 Ethernet OAM 10.3.1 Ethernet OAM Configuration

Ethernet OAM Configuration

Figure 10-9 Ethernet OAM Configuration
Parameter
This parameter displays the upper-threshold of the
threshold of error frames with CRC errors. The range is
from 1 to 65,535. The default is none.
10 OAM (Operations, Administration & Management)
Overview
377