Panasonic GA-ML Series Manual page 143

In the section of the settings on Access Group, you can configure the
following parameters.
Parameter
From Port to Port:
from the Beggining
to the End
Action
ACL Name
VID
Click Apply to reflect the change.
In the section of a table of IGMP Snooping Filter, you can configure the
following parameter.
Parameter
From Port to Port:
from the Beggining
to the End
Click Find to search and display the entries in a table based on the search
condition specified.
Click See All to search and display all the entries available.
Click Show Detail to display details on the entry.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Click Show Detail to display the following window.
5.7.1.3 IGMP Snooping Filter Settings
Choose the port you use.
Click Add to add a new entry based on the information
entered. Click Delete to delete an entry based on the
information entered.
Enter the name of the standard IP access-list. Specify
"any" in the source-address field of the access-list entry
and "G" in the destination-address field. The number of
characters for the name can be up to 32. Or, choose
Please Select to search and choose the existing access
list, which is configured by a switch for using this
configuration.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Choose the port you use.
5 L2 Features
Overview
Overview
141