Panasonic GA-ML Series Manual page 156

In the section of the settings on MLD Snooping Limitation, you can
configure the following parameters.
Parameter
From Port/ To Port
Number of
Limitations
Exceed Action
Except ACL Name
VID
Click Apply to add new entries based on the information specified.
Click Delete to delete entries based on the information specified.
In the section of Access Group Settings, you can configure the following
parameters.
Parameter
From Port/ To Port
Action
5.7.2.3 MLD Snooping Filter Settings
Choose the port you use.
Enter the number of limitations. Use this parameter to
limit the number of MLD cash entries, which can be
created. The range is from 1 to 2,048.
Choose an exceed action. Use this parameter to specify
the operation to process the group, which is newly
recognized when exceeding the limitation. The options
available are as follows.
• Default - The default action is executed.
• Drop - A new group is dropped.
• Replace - A new group is replaced to the oldest
group.
Enter the name of the standard IP access-list. The group
(*,G) or channel (S,G), which are allowed based on the
access list, are excluded from the limitation. To
authorize a channel (S,G), specify "S" in the field of
source-address of the access-list entry and "G" in the
destination- address field. To authorize a group (*,G),
specify "any" in the source-address field of the access-
list entry and "G" in the destination-address field. The
number of characters for the name can be up to 32.
Alternatively, click Please Select to search and choose
the existing access list, which is configured on the
switch (to be used for this configuration).
Enter the VLAN ID you use. The range is from 1 to
4,094.
Choose the port you use.
Click Add to add a new entry based on the information
entered. Click Delete to delete an entry based on the
information entered.
5 L2 Features
Overview
Overview
154