Panasonic GA-ML Series Manual page 154

In the section of a table of MLD Snooping Static Group, you can
configure the following parameters.
Parameter
VID
Group Address
Click Find to search and display the entries in a table based on the search
condition specified.
Click See All to search and display all the entries available.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
In the section of MLD Snooping Group Table, you can configure the
following parameters.
Parameter
VID
Group Address
Details
Click Find to search and display the entries in a table based on the search
condition specified.
Click See All to search and display all the entries available.
5.7.2.2 MLD Snooping Group Settings
Choose and enter VLAN IDs to use. The range is from 1
to 4,094.
Click the Radio button, and then enter an address of an
IPv6 Multicast Group.
Choose and enter VLAN IDs to use. The range is from 1
to 4,094.
Click the Radio button, and then enter an address of an
IPv6 Multicast Group.
If you choose this option, the details on MLD group are
displayed.
5 L2 Features
Overview
Overview
152