L3 Features; Arp (Address Resolution Protocol); Arp Aging Time - Panasonic GA-ML Series Manual

6

L3 Features

6.1

ARP (Address Resolution Protocol)

6.1.1
Use the following window to implement the settings on ARP aging time
and display its settings.
Choose L3 Features > ARP > ARP Aging Time to display the following
window.
In the section of Searching for ARP Aging Time, the following
parameters can be configured.
Interface VLAN
Time-out
Click Find to search and display the entries based on the search condition
specified.
Click See All to search and display all the entries available.
Click Edit to edit the entry-settings.
If two or more pages exist, enter the page-numbers. Then click Go to
move to a specific page.
6.1 ARP (Address Resolution Protocol) 6.1.1 ARP Aging Time

ARP Aging Time

Figure 6-1 ARP Aging Time
Parameter
Enter a VLAN ID. The range is from 1 to 4,094.
After you click Edit, enter the time-out value. The range
is from 0 to 65,535 (minutes).
6 L3 Features
Overview
178