Static Arp - Panasonic GA-ML Series Manual

6.1.2

Static ARP

Use the following window to implement the settings on the static ARP
and display its settings.
Choose L3 Features > ARP > Static ARP to display the following window.
In the section of the Static ARP Settings, you can configure the following
parameters.
Parameter
IP Address
Hardware Address
Apply
Click to add a new
In the section of Searching for Static ARP, you can configure the
following parameters.
Parameter
IP Address
IP Network Mask
Hardware Address
Interface VLAN
Click Find to search and display the entries based on the search condition
specified.
Click See All to search and display all the entries available.
Click Edit to edit the entry-settings.
Figure 6-2 Static ARP
Enter an IP address to associate with a MAC address.
Enter a MAC address to associate with an IP Address.
Static ARP entry.
Choose and enter an IP address of an entry.
Choose and enter a subnet mask of an IP address.
Choose and enter a MAC address of an entry.
Choose and enter a VLAN ID. The range is from 1 to
4,094.
6.1.2 Static ARP
Overview
Overview
6 L3 Features
179