Panasonic GA-ML Series Manual page 383

Click Clear All to clear the statistics of each port.
Click Details to display the statistics information on the corresponding
ports.
Click Clear to display the statistics information on the corresponding
ports.
In the section of Statistics Detail, you can configure the following
parameters.
Parameter
Port
OAMPDUTX
Information
OAMPDURX
Information
OAM PDU TX
Event Notification
OAM PDU RX
Event Notification
OAM PDU TX
Loop-back Control
OAM PDU RX
Loop-back Control
10 OAM (Operations, Administration & Management)
Figure 10-12 Statistics Details
This parameter displays a port of the statistics details.
This parameter displays the number of transmissions for
information OAM PDU.
This parameter displays the number of receptions for
information OAM PDU.
This parameter displays the number of transmissions for
event notification PDU.
This parameter displays the number of receptions for
event notification PDU.
This parameter displays the number of transmissions for
loop-back PDU.
This parameter displays the number of receptions for
loop-back PDU.
10.3.3 Ethernet OAM Statistics
Overview
381