Rmon Alarm Settings - Panasonic GA-ML Series Manual

4.5.4

RMON Alarm Settings

Choose Management > RMON > RMON Alarm Settings to display the
following window.
In the section of RMON Alarm Settings, you can configure the following
parameters.
Parameter
Index
Interval
Variables
Type
Rising Threshold
Falling Threshold
Rising Event Number
Falling Event Number Enter the event-entry index to use for notifying the
Owner
Click Add to add a new entry based on the information specified.
Click Delete to delete the entry.
Figure 4-13 RMON Alarm Settings
Enter the alarm index. The range is from 1 to 65,535.
Enter the interval of the cross-checking between a
variable sampling and the threshold as the second-unit.
The valid range is from 1 to 2,147,483,648.
Enter an object ID of variables for sampling.
Choose a monitoring type. The options available are
Absolute and Delta.
Enter the rising threshold within the range from 0 to
2,147,483,647.
Enter the falling threshold within the range from 0 to
2,147,483,647.
Enter the index of an event entry to use for notifying the
events, which exceed the rising threshold. The valid
range is from 1 to 65,535. If not specified, no actions
are necessary when the value exceeds the rising
threshold.
events, which exceed the falling threshold. The valid
range is from 1 to 65,535. If not specified, no actions
are necessary when the value exceeds the falling
threshold.
Enter the owner character strings; the maximum
number of the strings can be up to 127.
4 Management
4.5.4 RMON Alarm Settings
Overview
66