Dhcp Snooping Database - Panasonic GA-ML Series Manual

9.7.1.1.4

DHCP Snooping Database

Use the following window to implement the settings on the DHCP
Snooping database and display its settings.
Choose Security > SAVI > IPv4 > DHCPv4 Snooping > DHCP Snooping
Database to display the following window.
In the section of DHCP Snooping Database, you can configure the
following parameter.
Parameter
Write Delay
Click Reset to reset the DHCP Snooping database.
Click Apply to reflect the change.
In the section of Store DHCP Snooping Database, you can configure the
following parameter.
Parameter
URL
Click Reset to reset the stored DHCP Snooping database.
Click Apply to store (or save) the DHCP Snooping database.
Figure 9-44 DHCP Snooping Database
Enter the write-delay time (value). The range is from 60
to 86,400 (seconds). By default, the value is set to 300
(seconds).
Choose a location from the drop-down list and then
enter the URL for storing the DHCP Snooping database.
The locations to choose are TFTP, FTP and Local.
9.7.1.1.4 DHCP Snooping Database
Overview
Overview
9 Security
331