Panasonic GA-ML Series Manual page 399

In the section of Mirror Settings, you can configure the following
parameters.
Parameter
Session Number
Destination
Source
Click Apply to add a new entry.
Click Delete to delete entries based on the information specified.
Choose the mirror-session number of this entry. The
range of the number is from 1 to 4.
Choose and configure the destination settings on this
port-mirror entry. Choose Port or Remote VLAN of the
destination.
• Port - Choose the destination port-number.
• Remote VLAN - Choose the destination port-
number.
• Enter VID in the entry field displayed. The range of
VID is from 2 to 4,094.
Choose and configure the source settings on this port-
mirror entry. Choose Port, ACL or Remote VLAN of
the source.
• Port - Choose the range of the port-number by using
From Port to To Port. Choose a Frame Type.
• The options to choose from the frame-type is as
follows.
oBoth - Traffics of both reception and transmission
direction are mirrored. Traffics in both incoming
and outgoing directions are mirrored.
oReception (RX) - traffics in only the incoming
direction are mirrored.
oTransmission (TX) - traffics in only the outgoing
direction are mirrored.
oCPU RX - Monitors CPU RX traffics.
• ACL - Enter the ACL Name in the entry field
displayed. The number of characters for the name
can be up to 32.
• Remote VLAN - Enter a remote VID in the entry field
displayed. The range is from 2 to 4,094.
11 Monitoring
11.3 Mirror Settings
Overview
397