Port Grouping Configuration - Panasonic GA-ML Series Manual

3.3.7

Port Grouping Configuration

Use the following window to configure the port-grouping and display its
settings.
Choose System > Port Configuration > Port Grouping Configuration
to display the following window.
In the section of Port Grouping Configuration, you can configure the
following parameters.
Parameter
From Port - To Port
Port Group ID
(1-256)
Name of a Port Group Configure the name of a port-group.
State
Click Apply to add a new entry based on the information specified.
Figure 3-9 Port Grouping Configuration
Choose the range of the port-number.
Configure a port-group ID.
Enable or disable the port-grouping configuration.
3.3.7 Port Grouping Configuration
Overview
3 System
23