Table of Contents
Advertisement
Parameter
Source
Destination
Source Port
Choose and enter the source information. The options
available are as follows.
• Optional - Evaluates an optional source traffics
based on this rule condition.
• Host - Use and enter an IPv6 address of the source
host.
• IPv6 - Specifies and enter the source IPv6 address
and Prefix Length value in the spaces provided.
Choose and enter the destination information. The
options available are as follows.
• Optional - Specifies that any destination traffic is
evaluated according to the conditions of this rule.
• Host - Specifies and enters the destination host IPv6
address.
• IPv6 - Specifies and enter the destination IPv6
address and prefix-length value in the spaces
provided.
Choose and enter the source-port value. The options
available are as follows.
• = - The ACL uses the port-number specified.
• > - The ACL uses all the ports, which are greater than
the port number specified.
• < - The ACL uses all the ports, which are smaller than
the port number specified.
• ≠ - The ACL uses all the ports except for the port-
number.
• Range - The ACL uses the ports specified, within the
range.
• Mask - The ACL uses the ports, within the range of
the mask specified. Enter the port mask value in the
space provided. The range is from 0x0 to 0xFFFF.
• This parameter is available when you select TCP or
UDP as the protocol type.
8 ACL (Access Control List)
8.2.4 Extended IPv6 ACL
Overview
260
Hide quick links:
Advertisement
Table of Contents
