Panasonic GA-ML Series Manual page 255

Parameter
Destination Ports
TCP Flag
Specify ICMP
Message Type
ICMP Message Type
Message Code
IP Precedence
Choose and enter the value of a destination port. The
options available are as follows.
• = - ACL uses the port-number specified, only.
• > - ACL uses all the ports, which are greater than the
port-number specified.
• < - ACL uses all the ports, which are smaller than the
port-number specified.
• ≠ - ACL uses all the ports except for the port-number
specified.
• Range - ACL uses the port, which is specified within
the range.
• Mask - ACL uses the port within the range of the
mask specified. Enter the value of a port-mask in the
entry field displayed. The range is from 0x0 to 0xFFFF
• This parameter is available when you select TCP or
UDP from the Protocol Type.
Choose a TCP flag, which is evaluated in this ACL. The
options available are ack, fin, psh, rst, syn and urg.
This parameter is available when you select TCP from
the Protocol Type.
Choose an ICMP Message Type to use. This parameter
is available when you select ICMP from the Protocol
Type.
If you do not choose Specify ICMP Message Type,
enter the numerical value of an ICMP Message Type
to use. The range is from 0 to 255. If you choose the
ICMP Message Type, the numerical value of the
message type is automatically entered. This parameter
is available when you select ICMP from the Protocol
Type.
If you do not choose Specify ICMP Message Type,
enter the numerical value of a message code to use. The
range is from 0 to 255. If you choose the ICMP
Message Type, the numerical value of the message
type is automatically entered. This parameter is available
when you select ICMP from the Protocol Type.
Choose the value of IP precedence to use. The options
available are routine (0), priority (1), immediate (2),
flash (3), flash-override (4), critical (5), internet (6)
and network (7).
• Value - You can enter the value of IP precedence,
manually. The range is from 0 to 7.
• Mask - Enter the value of IP precedence mask. The
range is from 0x0 to 0x7.
8 ACL (Access Control List)
8.2.2 Extended IP ACL
Overview
253