Radius Server Settings - Panasonic GA-ML Series Manual

9.5.2

RADIUS Server Settings

Use the following window to implement the settings on a RADIUS server
and display its settings.
Choose Security > RADIUS > RADIUS Server Settings to display the
following window.
In the section of the RADIUS Server Settings, you can configure the
following parameters.
Parameter
IP Address
IPv6 Address
Authentication Port
Accounting Port
Retransmission
Timeout
Key Type
Key
Click Apply to add a new entry.
Click Delete to delete the entry specified.
Figure 9-32 RADIUS Server Settings
Enter an IPv4 address of a RADIUS server.
Enter an IPv6 address of a RADIUS server.
Enter the authentication port-number (value) you use.
The range is from 0 to 65,535. By default, the value is
set to 1,812. If no authentication is used, use the value
of 0.
Enter the accounting port-number (value) you use. The
range is from 0 to 65,535. By default, the value is set to
1,813. If no accounting is used, use the value of 0.
Enter the value regarding the number of
retransmissions. The range is from 0 to 20. By default,
the value is set to 3. To disable this option, enter the
value of 0.
Enter the timeout value you use. The range is from 1 to
255 seconds. By default, the value is set to 5 seconds.
Choose the key type you use. The options available are
Plain Text and Encrypted.
Enter the key, which is used to communicate with a
RADIUS server. The number of characters for the key
can be up to 32.
9.5.2 RADIUS Server Settings
Overview
9 Security
319