7.1.4
CoS to Queue Mapping
Use the following window to implement the settings on CoS
(transmission) to queue mapping and display its settings.
Choose QoS > Basic Settings > CoS to Queue Mapping to display the
following window.
You can configure the following parameter.
Parameter
Queue ID
Click Apply to check the content changed.
Figure 7-4 CoS to Queue Mapping
Choose a Queue ID to map the corresponding CoS-
value. The range of the values is from 0 to 7.
7 QoS (Quality of Service)
7.1.4 CoS to Queue Mapping
Overview
202