Panasonic GA-ML Series Manual page 104

In the section of VLAN Interface Settings, you can configure the
following parameters.
Parameter
VLAN Mode
Acceptable Frames
Checking Ingress
VLAN ID
Clone
From Port/ To Port
Click Apply to reflect the change.
Click Back to return to the previous window.
Choose Hybrid from VLAN Mode to display the following window.
Figure 5-22 VLAN Interface (Edit and Hybrid)
Choose the option of VLAN mode. The options available
are Access, Hybrid, Trunk, Promiscuous and Host.
Choose an operating option for acceptable frames.
The options available are Tagged only, Untagged
only and Admit All.
This parameter enables or disables a function of
checking ingress.
Enter the VLAN ID you use for this configuration. The
range is from 1 to 4,094.
If you choose this option, you need to enable a clone
function.
Choose the port you use.
5 L2 Features
5.2.6 VLAN Interface
Overview
102