5.3.4
STP Instance
Use the following window to implement the settings on an STP instance.
and display its settings.
Choose L2 Features > STP > STP Instance to display the following
window.
In the section of the STP Instance, you can configure the following
parameter.
Parameter
Instance Priority
Click Edit to edit the entry-settings to move to a specific page
If two or more pages exist, enter the page-numbers. Then click Go to
move to a specific page.
Figure 5-36 STP Instance
After you click Edit, enter the value of the instance
priority. The range is from 0 to 61,440.
5 L2 Features
5.3.4 STP Instance
Overview
124