Panasonic GA-ML Series Manual page 431

In the section of IPv6 Trace Route, you can configure the following
parameters.
Parameter
IPv6 Address
Domain Name
Max TTL
Port
Time-out
Probe Number
Click Start to start the IPv6 trace-route.
Choose and enter the IPv4 Trace Route parameter and click Start to
display the following window.
Click Back to return to the previous Trace-Route window
Choose and enter a destination IPv6 address.
Choose and enter a destination domain-name. The
number of characters for it can be up to 255.
Enter the maximum value of TTL of a trace-route
request. This is the maximum number of routers where
trace-route packets can pass. The trace-route option
passes when seeking the network path between two
devices. The range is from1 to 255 (hops).
Enter the port-number whose range is from 1 to
65,535.
Enter the time-out period (needed) when waiting for
the response coming from a remote device. The range is
from 1 to 65,535 (seconds). The default value is 5
seconds.
Enter the number of probe times. The range is from 1 to
1,000. The default value is 1 (second).
Figure 14-25 Trace Route (Result)
14.2.5 Trace Route
Overview
.
14 Tool Bar
429