Configuration Backup To Rcp - Panasonic GA-ML Series Manual

14.2.2.8 Configuration Backup to RCP

Use the following window to save a backup copy of a switch configuration
into an RCP server.
Choose Tools > Configuration Restore & Backup > Configuration
Backup to RCP from the tool-bar to display the following window.
You can configure the following parameters.
Parameter
RCP Server IP
User Name
Source File
Destination File
Click Backup to start the backup.
Figure 14-17 Configuration Backup to RCP
Enter an IP address of an RCP server.
Enter the user-name of the RCP connection. The
number of characters for the name can be up to 32.
Enter the source file-name and path of a configuration
file in a switch. The number of characters for this field
can be up to 64.
• If you choose the running-config option, a backup
of the configuration file being executed in a switch is
made.
• If you choose the startup-config option, a backup
of a start-up configuration file in a switch is made.
Enter a destination path and a location on the RCP
server, where a configuration file is saved. The number
of characters for this field can be up to 64.
14.2.2.8 Configuration Backup to RCP
Overview
14 Tool Bar
421