Panasonic GA-ML Series Manual page 220

Parameter
Confirm Action
Exceed Action
Choose the confirm action. The action specifies the
action to be taken for green colored packets. If the
action is not specified, the default action is Transmit.
The options available are as follows.
• Drop - This option allows you to drop the packets.
• Set-DSCP-Transmit - This option allows you to
configure and transmit the value of new DSCP to
packets. Enter the value in the entry field displayed.
• Set-1P-Transmit - This option allows you to
configure and transmit the value of new IEEE 802.1p
to packets. Enter the IEEE 802.1p value in the space
provided.
• Transmission - This option allows you to transmit
packets without switching them.
• DSCP-1P Configuration - This option allows you to
configure and transmit the value of new DSCP and
IEEE 802.1p to packets.Enter the values of DSCP and
IEEE 802.1p in the space provided.
Choose the exceed action. The exceed action specifies
an action to be taken on the packets, which exceed the
rate limit. For a two-rate policer, if the exceed action is
not specified, the default action is Drop.
The options available are as follows.
• Drop - This option allows you to drop the packets.
• Set-DSCP-Transmit - This option allows you to
configure and transmit the value of new DSCP to
packets. Enter the value in the entry field displayed.
• Set-1P-Transmit - This option allows you to
configure and transmit the value of new IEEE 802.1p
to packets. Enter the value in the entry field
displayed.
• Transmission - This option allows you to transmit
packets without switching them.
• DSCP-1P Configuration - This option allows you to
configure and transmit the valufe of new DSCP and
IEEE 802.1p to packets.
• Enter the values of DSCP and IEEE 802.1p in the
entry field provided.
7 QoS (Quality of Service)
7.2.7 Aggregate Policer
Overview
218