Panasonic GA-ML Series Manual page 226

Parameter
Violate Action
Color Aware
Click Apply to check the content changed.
Click Back to return to the previous window.
Click the Policer button, and then specify the Police CIR as a police action
to display the following window.
Figure 7-19 Policy Map (Policer, Police CIR)
Choose the violate action to perform it. This action is
performed on red colored packets. The options
available are as follows.
• None - No violate action is taken.
• Drop - This option allows you to drop the packets.
• Set-DSCP-Transmit - This option allows you to
configure and transmit the value of new DSCP to
packets.Enter the DSCP value in the entry field
displayed.
• Set-1P-Transmit - This option allows you to
configure and transmit the value of new IEEE 802.1p
to packets. Enter the IEEE 802.1p value in the entry
field displayed.
• Transmission - This option allows you to transmit
packets without changing them.
• DSCP-1P Configuration - This option allows you to
configure and transmit the values of a new DSCP
and IEEE 802.1p to packets. Enter the values in the
entry field displayed.
This parameter enables or disables a function of the
color aware.
• If enabled, the policer operates as the color aware
mode.
• If disabled, the policer operates as the color blind
mode.
7 QoS (Quality of Service)
7.2.8 Policy Map
Overview
224