Storm Control - Panasonic GA-ML Series Manual

9.13

Storm Control

Use the following window to implement the storm-control settings and
display its settings.
Choose Security > Storm Control to display the following window.
In the section of Storm Control Polling Settings, you can configure the
following parameters.
Polling Interval
Shutdown Retries
Click Apply to reflect the change.
Figure 9-61 Storm Control (Level Type and PPS)
Parameter
Enter the value regarding a polling interval to use. The
range is from 5 to 600 (seconds). By default, the value is
5 (seconds).
Enter the value regarding the number of shutdown
retrials. The range is from 0 to 360. By default, the value
is 3. If you set the Unlimited option to on, this function
becomes disabled.
9.13 Storm Control
Overview
9 Security
-
356