Panasonic GA-ML Series Manual page 19

Parameter
Speed
Capability Advertised If you set the Speed to Auto, these functions are
Description
Click Apply to reflect the change made.
3.3 Port Settings 3.3.1 Port Settings
The following options are available to choose.
• Automatic - In the case of a copper-port, an auto
negotiation starts, and then it allows the speed and
flow control to negotiate with its link-partner. In the
case of fiber-ports, the auto negotiation starts, and
then it allows the clock and full-control to negotiate
with its link-partner.
• 10M - This value sets the port speed to 10 Mbps,
forcefully. This option is available for 10 Mbps
copper-cable connection, only.
• 100M - This value sets to the port speed to
100Mbps, forcefully. This option is available for
100Mbps copper-cable connection, only.
• 1000M - This value sets the port speed to 1Gbps,
forcefully. This option is available for 1Gbps fiber-
connection, only.
• 1000M Master - This value sets the port speed to
1Gbps forcefully, and functions as the master, and
facilitates the timing of an operation for sending and
receiving. This option is available for 1Gbps copper-
cable connection, only.
• 1000M Slave - This value sets the port speed to
1Gbps forcefully, and also functions as the slave to
facilitate the timing of an operation for sending and
receiving. This option is only available for 1Gbps
copper-cable connection.
advertised during the Auto Negotiation.
Describe an overview of the corresponding ports. The
number of characters can be up to 64.
Overview
3 System
17