Nlb Fdb Settings - Panasonic GA-ML Series Manual

4.12

NLB FDB Settings

Use the following window to implement the settings on NLB (Network
Load Balancing) and FDB (File Database) of the port specified and to
display its settings.
Choose Management > NLB FDB Settings to display the following
window.
In the section of NLB FDB Settings, you can configure the following
parameters.
NLB Type
VID
MAC Address
From Port/ To Port
Click Apply to reflect the change.
Click Delete All to delete all the entries.
Click Delete to delete the entry.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 4-26 NLB FDB Settings
Parameter
Choose the NLB type. The options available are Unicast
and Multicast.
Choose Multicast from NLB type, and then enter the
VLAN ID you use. The range is from 1 to 4,094.
Enter the Unicast of entries or Multicast MAC address.
If the destination MAC address of packets, which are
received, corresponds with the MAC address specified,
the packets are transferred to the interface specified.
Choose the port you use.
4 Management
4.12 NLB FDB Settings
Overview
79