9.7.1.2.4
ARP Inspection Statistics Information
Use the following window to display and clear the statistics information on
the dynamic ARP inspection.
Choose Security > SAVI > IPv4 > Dynamic ARP Inspection > ARP
Inspection Statistics Information to display the following window.
Figure 9-50 ARP Inspection Statistics Information
You can configure the following parameter.
Parameter
VID List
Click Clear by VLAN to clear the statistics information about the VLAN
specified.
Click Clear All to clear all the statistics information.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
9.7.1.2.4 ARP Inspection Statistics Information
Enter the VLAN ID you use. You can enter its
consecutive VLAN IDs by delimiting with a comma or
enter the range of VLAN IDs by delimiting with a
hyphen. The range is from 1 to 4,094.
Overview
9 Security
340