Ipv6 Default Route - Panasonic GA-ML Series Manual

6.6

IPv6 Default Route

Use the following window to implement the settings on an IPv6 default
route and display its settings.
Choose L3 Features > IPv6 Default Route to display the following
window.
In the section of IPv6 Default Route, you can configure the following
parameters.
IPv6 Address/
Prefix Length
Interface Name
Next Hop IPv6
Address
Distance
Click Apply to add a new entry.
Click Delete to delete the entry specified.
If two or more pages exist, enter the page numbers. Then click Go to
move to a specific page.
Figure 6-15 IPv6 Default Route
Parameter
Enter an IPv6 address and prefix-length for this route. If
you set Default Route to on, use this route for a
default route.
Enter an interface name to be associated with this
route.
Enter an IPv6 address of the next hop.
Enter the distance for the static route management. The
range is from 1 to 254. The lower the value, the better
route will be. If not specified, the distance becomes 1
for managing a static-route (by default).
6 L3 Features
6.6 IPv6 Default Route
Overview
195