Panasonic GA-ML Series Manual page 302

Parameter
Authentication Fail
Block Time
Click Apply to check the content changed.
In the section of AAA MAC Authentication Settings, you can configure
the following parameters.
Parameter
Primary Database
Secondary Database
Authentication Fail
Action
Authentication
Failure Block-time
Click Apply to check the content changed.
9.3.2 AAA Authentication Settings
Enter the number of seconds (needed) to block a host in
case of the Web authentication failure. The range is
from 1 to 65,535 (seconds).
Choose a primary database to use for a MAC
authentication. The options available are as follows.
• RADIUS - Uses the database on a RADIUS server as
the primary database.
• Local - Uses the local database on a switch as the
primary database.
Choose a secondary database to use for a MAC
authentication. The options available are as follows.
• None - Does not use the secondary database.
• RADIUS - Uses the database on a RADIUS server as
the secondary database.
• Local - Uses the local database on a switch as the
secondary database.
Choose an action to execute in case of MAC
authentication failure. The options available are as
follows.
• Stop - Uses a primary database to stop an
authentication in case of the MAC authentication
failure.
• Secondary DB - Uses a primary database to start an
authentication by using the secondary database in
case of the MAC authentication failure.
Enter the number of seconds to block a host in case of
the MAC authentication failure. The range is from 1 to
65,535 (seconds).
Overview
Overview
9 Security
300