Ssl Service Policy - Panasonic GA-ML Series Manual

9.15.3

SSL Service Policy

Use the following window to implement the settings on the SSL service
policy and display its settings.
Choose Security > SSL > SSL Service Policy to display the following
window.
In the section of the SSL Service Policy, you can configure the following
parameters.
Parameter
Policy Name
Version
Session Cache Time-
out
Secure Trust Point
Encryption Sweet
Click Apply to add a new entry.
Click Find to search and display the entries based on the search condition
specified.
Figure 9-70 SSL Service Policy
Enter the name of the SSL service policy. The number of
characters for the name can be up to 32.
Choose a version of Transport Layer Security (TLC). The
options available are TLS 1.0, TLS 1.1 and TLS 1.2.
Enter the time-out value of a session cache. The range is
from 60 to 86,400 (seconds). By default, the value is set
to 600 (seconds).
Enter the name of the secure trust point. The number of
characters for the name can be up to 32.
Choose the cipher suite to associate with this profile.
9.15.3 SSL Service Policy
Overview
9 Security
366